Opening the valve at 68 ℃ (Stock 78 ℃) Full opening at 83 ℃ (Stock 90 ℃)
All Honda vehicles with high power motor maintain a delicate relationship between the water temperature and the engine power. When the radiator water temperature starts rising, the ECU automatically reduces the risk (Map correction mode) by increasing the fuel and retarding the ignition timing, which results in losing power.
This thermostat sets the valve’s opening temperature lower than the stock to circulate the coolant earlier and to maintain the temperature at around 75℃ to 85 ℃. As a result, it works toward preventing power loss, knocking and various negative thermal effects.
The installation is an easy bolt-on regardless of the type of radiator used.
A must-have item for Honda with high power for all driving stages
Not to mention the great positive impact on a large performance radiator, but it can be significantly effective with very light modification – stock radiator + low temperature thermostat + low temperature thermal switch + performance coolant.
With above mentioned light mod, the water temperature stays at around 80 ℃ on street driving.
J’s Racing recommends the use of this product in combination with the lower thermal switch
use the proper tightening torque
Make sure to bleed the air completely after the installation
Print This Page
and 
are trademarks or registered trademarks of J'S CORPORATION.