Vehicle Model fit: AP1/2 (About Vehicle Model)#CAJ-S1-RPSL1 / $103
2012-11-22 Release
Materials:6061 Forged aluminum
A new geometry parts for S2000!!
A long waited optional part for the camber joint S2 is released!
By adding this 4mm thickness plate to the CAJ-S1-S1, a further correction of the roll center is possible. Depending on the degree you would like to adjust, choose the proper number and combination of the plates. The pictures on the left show several combinations.
For the perfect footwork setting on any driving stage, this is a great item to win over the competition.
It works in a variety of driving situations from the street to the race track.
It is a must-have item for a spirited sport driving with S2000.
The thickness of the plate (4mm)
A set includes
Roll Center Adjustor plate L1 x2
Special bolt x4
<Plate material>
Forged aluminum 6061 with blue anodized surface
“J’S RACING” logo is engraved by laser.
This product is designed for the camber joint S1 only.
It is not compatible with the camber joint S2 or other manufacturers products.
Please use the proper tightening torque.
The alignment and ride height are to be checked and adjusted after the installation of this product.
A periodic inspection of bolt and nuts are strongly recommended. Especially when driving on a race track, inspect and tighten the bolt if necessary.
Print This Page
and 
are trademarks or registered trademarks of J'S CORPORATION.