J's Racing Tsuchinoko Intake System for S2000
Maximize the potential of the AP2's torquey F22C engine
This is the ultimate intake for the Honda S2000, no matter if your car is purely street driven or a dedicated race car.
The unique shape inherent to the Tsuchinoko intakes holds a large reservoir of air directly after the filter and in front of the throttle body, allowing for the maximum air into the engine during quick throttle inputs. This design has proven to improve throttle response, low end torque, and overall engine performance throughout the rev range.
For Track-dedicated cars, we do offer a special order option that forgoes the modifications required for the factory air pump and PCV tube to further increase the volume of air and decrease the potential for turbulence inside the intake chamber. Please contact us about this option when you make your order.
Product Details※The parts required for installation are included.
※Fits the stock bumper. For the customers who have J's Racing Street ver. front bumper, choose the TCC-S1-TS Tsuchinoko Intake. Please contact us before making your purchase.
The intake is equipped with a draining hole, but spirited driving in extremely wet conditions should be avoided if possible.
※ The product may interfere with other manufacturers’ tower bar. (It can be used with the J's Racing tower bar without hitting)
※ Minor modification (cutting) is required on the back side of the stock hood or our Street Ver. hood.
※ The J's Racing Type V hood does not require any modification.
※ Minor modification is required on the stock bumper and stock air guide. The duct can also be modified without making any change on the stock bumper.
※ A part of the stock plastic radiator shroud has to be clearanced.
※ A model without the bleed nipple is available for the secondary air / blow-by piping.
※ The stock black performance rod, located on the back side of the beam, has to be removed.
Print This Page
and 
are trademarks or registered trademarks of J'S CORPORATION.